Water-based baking type metallic top coat (gray)
Water-based Metal Paint · Category: Metal paint
General-purpose water-based paint for metal surfaces. Easy application, good durability, and broad color range for industrial and architectural metalwork.
Key Features
- Direct-to-metal application
- Good corrosion resistance
- Water-based, low odor, fast drying
- Wide color and gloss range
- Suitable for shop and field
Typical Applications
Metal furnitureFencingDecorative metalworkHVACGeneral metal
Technical Specifications
| Type | Water-based acrylic |
|---|---|
| Color | Custom |
| Solid content | ≥ 45% |
| Dry to touch | ≤ 30 min @ 25°C |
| Salt spray | ≥ 200h |
| Adhesion | Grade 1 |
| VOC | < 50 g/L |
| Coverage | 8-10 m²/kg @ 30μm DFT |
Application Notes
Surface preparation: Remove all oil, grease, dirt, and loose rust. Abrasive blast to Sa 2½ (ISO 8501-1) for best results, or power tool clean to St 3 minimum. Apply on dry surface with substrate temperature at least 3°C above dew point.
Mixing: Stir component A thoroughly, then add component B (if applicable) in the correct ratio. Mix with mechanical stirrer for 3 minutes until uniform. Pot life varies by product, typically 2 hours at 25°C.
Application: Airless spray is recommended for best results. Brush or roller suitable for small areas and touch-up. Apply in even, wet coats to specified DFT. Do not exceed recommended film thickness to avoid sagging.
Storage & Safety
Store in original sealed container between 5-35°C, away from direct sunlight and freezing. Shelf life is 12 months from date of manufacture in unopened container. Refer to product SDS for detailed safety, handling, and first-aid information. Use appropriate PPE during application.
