Water-borne motorcycle parts metal paint
Water-based Accessory Coating · Category: Motorcycle accessories
High-gloss water-based coating for motorcycle and accessory parts. Excellent weathering resistance, color retention, and mechanical properties for high-end appearance and durability.
Key Features
- High gloss and mirror finish
- Excellent weathering and UV resistance
- Strong adhesion on metal and plastic
- Water-based, low VOC
- Resistant to gasoline, oil, and brake fluid
Typical Applications
Motorcycle framesFuel tanksHelmetsWheelsAccessory parts
Technical Specifications
| Type | Water-based acrylic polyurethane |
|---|---|
| Color | Custom color matching |
| Gloss | ≥ 90 @ 60° |
| Solid content | ≥ 50% |
| Hardness | ≥ H (pencil) |
| Adhesion | Grade 0 |
| VOC | < 80 g/L |
| Coverage | 8-12 m²/kg @ 30μm DFT |
Application Notes
Surface preparation: Remove all oil, grease, dirt, and loose rust. Abrasive blast to Sa 2½ (ISO 8501-1) for best results, or power tool clean to St 3 minimum. Apply on dry surface with substrate temperature at least 3°C above dew point.
Mixing: Stir component A thoroughly, then add component B (if applicable) in the correct ratio. Mix with mechanical stirrer for 3 minutes until uniform. Pot life varies by product, typically 2 hours at 25°C.
Application: Airless spray is recommended for best results. Brush or roller suitable for small areas and touch-up. Apply in even, wet coats to specified DFT. Do not exceed recommended film thickness to avoid sagging.
Storage & Safety
Store in original sealed container between 5-35°C, away from direct sunlight and freezing. Shelf life is 12 months from date of manufacture in unopened container. Refer to product SDS for detailed safety, handling, and first-aid information. Use appropriate PPE during application.
