Water-based anti-rust paint (salt spray 20 hours)
Water-based Anti-corrosion Coating · Category: Oil tank
Single-component or two-component water-based anti-corrosion coating for steel structures, offering balanced protection and ease of application. Ideal for medium-corrosion environments and projects requiring fast turnaround.
Key Features
- 240-500 hours salt spray resistance
- Direct-to-metal application possible
- Water-based, low VOC, environmentally friendly
- Fast dry, excellent early water resistance
- Good flexibility and impact resistance
Typical Applications
Steel structuresMachinery housingsFencingContainersGeneral industrial
Technical Specifications
| Type | Water-based acrylic/epoxy hybrid |
|---|---|
| Color | Custom colors available |
| Solid content | ≥ 50% |
| Dry to touch | ≤ 30 min @ 25°C |
| Recoat time | ≥ 2 hours |
| Salt spray | ≥ 240h |
| Adhesion | Grade 1 |
| VOC | < 60 g/L |
| Coverage | 8-10 m²/kg @ 40μm DFT |
Application Notes
Surface preparation: Remove all oil, grease, dirt, and loose rust. Abrasive blast to Sa 2½ (ISO 8501-1) for best results, or power tool clean to St 3 minimum. Apply on dry surface with substrate temperature at least 3°C above dew point.
Mixing: Stir component A thoroughly, then add component B (if applicable) in the correct ratio. Mix with mechanical stirrer for 3 minutes until uniform. Pot life varies by product, typically 2 hours at 25°C.
Application: Airless spray is recommended for best results. Brush or roller suitable for small areas and touch-up. Apply in even, wet coats to specified DFT. Do not exceed recommended film thickness to avoid sagging.
Storage & Safety
Store in original sealed container between 5-35°C, away from direct sunlight and freezing. Shelf life is 12 months from date of manufacture in unopened container. Refer to product SDS for detailed safety, handling, and first-aid information. Use appropriate PPE during application.
