Water-based silver plated baked enamel
Water-based Industrial Coating · Category: Oil tank
Water-based silver plated baked enamel — high-performance water-based industrial coating manufactured by SGTECH Coatings. Designed for demanding industrial applications requiring balanced corrosion protection, environmental compliance, and ease of application.
Key Features
- Water-based, low VOC (< 80 g/L)
- Excellent adhesion and durability
- 240h+ salt spray resistance
- Compatible with primer systems
- Custom colors available
Typical Applications
General steelIndustrial equipmentStructural steelMachineryOEM
Technical Specifications
| Type | Water-based industrial coating |
|---|---|
| Color | Custom |
| Solid content | ≥ 50% |
| DFT | 30-80μm typical |
| Salt spray | ≥ 240h |
| Adhesion | Grade 0-1 |
| VOC | < 80 g/L |
| Coverage | 8-10 m²/kg @ 40μm DFT |
Application Notes
Surface preparation: Remove all oil, grease, dirt, and loose rust. Abrasive blast to Sa 2½ (ISO 8501-1) for best results, or power tool clean to St 3 minimum. Apply on dry surface with substrate temperature at least 3°C above dew point.
Mixing: Stir component A thoroughly, then add component B (if applicable) in the correct ratio. Mix with mechanical stirrer for 3 minutes until uniform. Pot life varies by product, typically 2 hours at 25°C.
Application: Airless spray is recommended for best results. Brush or roller suitable for small areas and touch-up. Apply in even, wet coats to specified DFT. Do not exceed recommended film thickness to avoid sagging.
Storage & Safety
Store in original sealed container between 5-35°C, away from direct sunlight and freezing. Shelf life is 12 months from date of manufacture in unopened container. Refer to product SDS for detailed safety, handling, and first-aid information. Use appropriate PPE during application.
